|
Pipe Flashings : Square Base
 |
Used on Many applications, including sealing root and wall panels arfound Flues, Air conditioning ducts, dust extractors, TV aerials, conduits, and support frames.
|
 |
Material Specifications
| EPDM (Grey) |
-65c to +250c |
ASTM-D D2000, M2, BA 507, C12, F17, Z1, Z2, Z3, Z4 |
| Silicone |
-100c to +450c |
ASTM-D D2000, M4, GE 505, A19, B37, C12, F19, Z1, Z2, Z3 |
.
Pipe Flashing Specifications - Size Chart
| 7 |
150-280 |
115 |
356 |
150 |
| 6 |
125-230 |
100 |
306 |
150 |
| 2 |
44-82 |
35 |
155 |
100 |
| 3 |
6-127 |
Closed |
197 |
100 |
| 8 |
175-330 |
140 |
412 |
150 |
| 4 |
75-160 |
57 |
235 |
125 |
| 5 |
108-109 |
89 |
270 |
125 |
| 9 |
254-483 |
197 |
837 |
200 |
| 1 |
6-50 |
Closed |
120 |
75 |
Installation Procedure
| 1) CUT |
 |
A neat hole must be cut in the roofing sheet with minimum clearance for pipe. |
|
| 2) SLIDE AND APPLY |
 |
Slide pipe flashing down over pipe, (if desired, water can be used as a lubricant). Apply a silicone sealant on underside of flange. Turning back flexible flange makes this simple. |
|
| 3) PRESS |
 |
Press pipe flashing into contours of root panel configuration, if there is a sharp angle in the panel configuration, a blunt tool can be used to pres the flashing into place. |
|
| 4) FASTEN |
 |
Drill and fasten flashing to surface with "Drillit" self-drilling screws or rivets. Use a blunt tool to press base into sharp corners of valleys while drilling. |
|
|
